How to Build an Outdoor Shower Enclosure - Tools Needed

Learn how to build an outdoor shower enclosure; includes step-by-step instructions along with tips, materials, and tools lists.

Tools and supplies:
      Hammer drill
      Carbide tipped masonry bit
      Masking or electrical tape
      Air compressor or a can of compressed air
      Sliding compound miter saw
      Safety goggles
      Galvanized 10d bracket nails
      Clamps
      Post levels
      2' to 3' level
      Pencil
      Japanese hand saw
      Tape measure
      Waterproof polyester adhesive
      #10 X 3" deck screws
      1 ½" rust resistant deck screws
      10 penny (10d) X 1 ¼" galvanized nails
      Plastic mallet      
      Pneumatic nail gun
      6 penny (6d) nails
      #8 X ½" rust resistant deck screws

Materials:
      Post bases
     Expansion anchors
     Nuts and washers
     4 x 4 pressure treated pine
     2 x 4 pressure treated pine
     Metal brackets for 2 X 4 crossbars
     1 X 6 pressure treated pine
     Heavy duty strap hinges
     1 x 2 pressure treated pine (for door stop)
     Scrap lumber for temporary block

Note: This list is based on this specific project and situation. Please adjust these items and instructions to your particular needs.

Return To Project >