How to Design and Build an Attached Pergola - Tools Needed

Learn how to design and build a pergola; watch a video demonstrating how the ledger, posts and beams fit together.

Tools and supplies:
      Tape measure
      Combination square
      Safety goggles
      Jig saw
      Cordless drill
      A second cordless drill
      Assorted drill bits
      Countersink bit
      Assorted driver bits
      Square head driver bits
      Carbide tip masonry bit
      Hammer drill
      Socket wrench
      Hammer
      Stakes
      Scrap wood for temporary supports
      Pencil
      Japanese hand saw

Materials:
      1 x 6 or 1 x 8 cedar, redwood or pressure treated pine
     4 x 4 lumber for posts
     Lag screws (length as needed)
     Post brackets
     Expansion anchors
     Metal post supports
     1 ½" 10d heavy galvanized nails
     Screws
     Square head stainless steel screws
     Clamps
     Sandpaper

Note: This list is based on this specific project and situation. Please adjust these items and instructions to your particular needs.

Return To Project >