Introduction
Having constructed built-in bookshelves, the homeowners have decided to add color to the walls behind the shelves as an accent. To help decide on a color, they paint samples of three shades on large pieces of scrap bead board and try them out on the bookshelves. They decide on a color and also decide they like the striped effect of the color on the bead board. Consequently, they decide to paint the bead board rather than the walls and then nail up the colored panels.

Choose Colors to Sample That Tone with Your Room
Finish the bookshelf construction and then decide which colors to try. Choosing a color used on a lamp or other piece of furniture that will reside in the room can enhance the bookshelf.

View Color Samples at Your Home Improvement Store
Visit your home improvement store or paint retailer and review the color sample cards available.

Choose Indoor Paint in Flat or Gloss Finish
Choose an indoor paint in either oil base or latex with the appropriate gloss, flat, or textured finish. Depending on the durability of a textured finish, it might not be a good choice if books will be pushed against it or otherwise move against the surface. Take several sample cards home to confer with the folks at home and narrow the choice down to three.

Purchase Quarts of the Sample Colors
Purchase quarts of the three samples you choose. Once you have firmly decided on a color, you can purchase additional paint.

Paint Large Samples for a Good Indication of Color
Use three large pieces of scrap plywood or bead board and paint each in one of the colors you are considering.

Dry the Test Panels Thoroughly
Lay out the pieces to dry while you paint the next sample panel. Let all three dry thoroughly. Oil base paint will take more time to dry.

View the Samples on the Bookcase
Place the three samples in separate compartments on the bookshelf. Consider them in various positions to determine if lighting is affecting their appearance. You may want to view them in both daylight and artificial light. Decide which sample you will use and purchase another quart of the same color. If the color had to be mixed at the paint store, you may slight color variation from the first batch. If necessary, mix the two quarts together so that you get an even tone.

Paint Panels and Notch Them for Electrical Outlets
Paint cut-to-measure panels of bead board. Using a roller will complete the painting in less time than using a brush. Let the panels dry. Remember to cut notches where required for the electrical outlets. If you need to use two or more panels for each bookshelf compartment, make sure the cut edges are straight and smooth before you paint so that they make a neat joint when you install them.

Align the Painted Panels and Secure Them with a Brad Gun
Align the painted panels in the correct compartments on the bookshelf and secure them with a brad gun. Only a few brads are required along the edges to hold the rigid panels in place. Fewer nails will make the panels easier to remove and replace if you wish to redecorate with a different color later.

Reattach the Electrical Outlets and Covers
Position the electrical outlets and secure them and their plate covers to the bead board. Load the bookshelves with books and collectibles.