How to Build an Outdoor Shower Enclosure - Tools Needed
|
| |
| Learn how to build an outdoor shower enclosure; includes step-by-step instructions along with tips, materials, and tools lists.
|
Tools
and supplies:
 Hammer drill
Carbide tipped masonry bit
Masking or electrical tape
Air compressor or a can of compressed air
Sliding compound miter saw
Safety goggles
Galvanized 10d bracket nails
Clamps
Post levels
2' to 3' level
Pencil
Japanese hand saw
Tape measure
Waterproof polyester adhesive
#10 X 3" deck screws
1 ½" rust resistant deck screws
10 penny (10d) X 1 ¼" galvanized nails
Plastic mallet
Pneumatic nail gun
6 penny (6d) nails
#8 X ½" rust resistant deck screws
Materials:
Post bases
Expansion anchors
Nuts and washers
4 x 4 pressure treated pine
2 x 4 pressure treated pine
Metal brackets for 2 X 4 crossbars
1 X 6 pressure treated pine
Heavy duty strap hinges
1 x 2 pressure treated pine (for door stop)
Scrap lumber for temporary block
Note: This list is based on this specific project
and situation. Please adjust these items and instructions to your
particular needs.
|
